Sub Assembly - Optical Tube

1. Place the Thorlabs CML100 tube in the optical tube clamp as shown in the image below. Lightly fasten the tube to the clamp using one M4.

1. Add the 50mm Extension tube to the optical tube clamp as shown in the image below.

1. Add the objedtive lens to the tube clamp as shown in the image below.

1. Add the Raspberry Pi Camera to the tibe top as shown in the image below.

1. Attach the optical tube clamp to the Z Lead Screw Mount as shown in the image below. Use 4 M3 screws to fasten the clamp to the mount.